Win 10 verändert UEFI Boot Eintrag

Hallo Liebe Liste

nachdem ich mein Problem mit der Linbo GUI lösen konnte und nun zur Installation der beiden
Betriebssysteme gekommen bin ergibt sich nun ein neues Problem.
Ausgangslage: HP ProDesk 600 mit Uefi Bios, Win 10 1703 und Linux Mint 18.03.
Uefi Bios Boot Einstellungen: PXE Netzwerkboot.
Nach dem Starten von Win 10 verändert dieses den UEFI Boot Eintrag auf Windows Boot Manager.
Wie kann ich das verhindern?

L.G.
Uwe

Hallo Uwe,

nachdem ich mein Problem mit der Linbo GUI lösen konnte und nun zur
Installation der beiden
Betriebssysteme gekommen bin ergibt sich nun ein neues Problem.
Ausgangslage: HP ProDesk 600 mit Uefi Bios, Win 10 1703 und Linux Mint
18.03.
Uefi Bios Boot Einstellungen: PXE Netzwerkboot.
Nach dem Starten von Win 10 verändert dieses den UEFI Boot Eintrag auf
Windows Boot Manager.

hab ich bei mir noch nicht bemerkt…

Wie kann ich das verhindern?

…ist das nciht egal?
Nächster Boot ist per PXE und wenn linbo bootet, dann wird das wieder
gerichtet, oder?

LG

Holger

Nein, ich denke das ist genau das Problem - Windows schreibt sich selbst an Stelle 1 statt PXE.

Wir hatten das Problem auch schon bei manch Hardware. Benutzt du Labels? Damit sollte man es in den Griff bekommen. Wir haben aber aktuell auch ein Gerätetyp der es trotz Labels immer wieder umschreibt. Hatten aber noch keine Gelegenheit das anzugehen. Da in dem Fall gewünscht ist das Windows schnell startet gibt es auch keinen Druck :slight_smile:

In jedem Fall brauchst du ein aktuelles Linbo da das grundsätzliche Problem erst vor ein paar Versionen gelöst wurde.

Hallo Holger

der nächste Bootvorgang ist eben nicht per PXE da Windows das ja geändert hat.
Der nächste Bootvorgang erfolgt mit dem Windows Bootloader Eintrag.
Mir ist gerade noch aufgefallen das Linux Mint den Booteintrag auch ändert von PXE
auf Grub.

@ Kai
Ja ich benutze Labels.

Hier die Linbo Log Datei:
Installing for x86_64-efi platform.
grub-install: warning: cannot open directory /usr/share/locale': No such file or directory. GPT:disk_guids don't match. GPT: Use GNU Parted to correct GPT errors. GPT:disk_guids don't match. GPT: Use GNU Parted to correct GPT errors. GPT:disk_guids don't match. GPT: Use GNU Parted to correct GPT errors. Installation finished. No error reported. Stelle EFI-Standardboot wieder her. Setze EFI BootNext: 000D. BootNext: 000D BootCurrent: 0013 Timeout: 0 seconds BootOrder: 000D,0013,000A,000C,000E,0000,0001,0002,0003,0004,0005,0006,0007,0008,0009,000B Boot0000 Startup Menu Boot0001 System Information Boot0002 Bios Setup Boot0003 Drittanbieter-Option für das ROM-Management Boot0004 System Diagnostics Boot0005 System Diagnostics Boot0006 System Diagnostics Boot0007 System Diagnostics Boot0008 Boot Menu Boot0009 HP Recovery Boot000A* grub Boot000B Network Boot Boot000C* IPV6 Network - Intel(R) Ethernet Connection (5) I219-LM Boot000D* Linux Mint Boot000E USB: Boot000F SATA-CD: Boot0010* Sony Storage Media 2A08120800889 Boot0011* Windows Boot Manager Boot0012 Windows Boot Manager Boot0013* IPV4 Network - Intel(R) Ethernet Connection (5) I219-LM Boot0014* Windows Boot Manager Boot0016* SanDisk SD8SB8U-256G-1006 Setze EFI Bootreihenfolge: 000A,0013. BootNext: 000D BootCurrent: 0013 Timeout: 0 seconds BootOrder: 000A,0013 Boot0000 Startup Menu Boot0001 System Information Boot0002 Bios Setup Boot0003 Drittanbieter-Option für das ROM-Management Boot0004 System Diagnostics Boot0005 System Diagnostics Boot0006 System Diagnostics Boot0007 System Diagnostics Boot0008 Boot Menu Boot0009 HP Recovery Boot000A* grub Boot000B Network Boot Boot000C* IPV6 Network - Intel(R) Ethernet Connection (5) I219-LM Boot000D* Linux Mint Boot000E USB: Boot000F SATA-CD: Boot0010* Sony Storage Media 2A08120800889 Boot0011* Windows Boot Manager Boot0012 Windows Boot Manager Boot0013* IPV4 Network - Intel(R) Ethernet Connection (5) I219-LM Boot0014* Windows Boot Manager Boot0016* SanDisk SD8SB8U-256G-1006 Installiere GRUB in MBR/EFI von /dev/sda ... Installing for x86_64-efi platform. grub-install: warning: cannot open directory/usr/share/locale’: No such file or directory.
Installation finished. No error reported.
OK!

Log session end: Fr 15. Jun 07:46:55 CEST 2018

Log session begin: Fr 15. Jun 07:49:39 CEST 2018

Hardware-Setup - Anfang

ACPI: bus type PCI registered
dca service started, version 1.12.1
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added OSI(Module Device)
ACPI: Added OSI(Processor Device)
ACPI: Added OSI(3.0 SCP Extensions)
ACPI: Added OSI(Processor Aggregator Device)
ACPI: Executed 17 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88022686C800 000717 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: _PR
.PR00: OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88022680C800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88022E30E000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802269F2000 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: _SB
.PCI0.LPCB.EC0
: Used as first EC
ACPI: _SB
.PCI0.LPCB.EC0
: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: _SB
.PCI0.LPCB.EC0
: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A08:00: OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0xce800000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1fffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
pci 0000:00:02.0: [8086:5912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x1ff0000000-0x1ff0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x1fe0000000-0x1fefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xce920000-0xce92ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0x1ff1016000-0x1ff1016fff 64bit]
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x1ff1015000-0x1ff1015fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:16.3: [8086:a2bd] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x3088-0x308f]
pci 0000:00:16.3: reg 0x14: [mem 0xce938000-0xce938fff]
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xce934000-0xce935fff]
pci 0000:00:17.0: reg 0x14: [mem 0xce937000-0xce9370ff]
pci 0000:00:17.0: reg 0x18: [io 0x3080-0x3087]
pci 0000:00:17.0: reg 0x1c: [io 0x3090-0x3093]
pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:17.0: reg 0x24: [mem 0xce936000-0xce9367ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1f.0: [8086:a2c6] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xce930000-0xce933fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0x1ff1010000-0x1ff1013fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x1ff1000000-0x1ff100ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x1ff1014000-0x1ff10140ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.6: [8086:15e3] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xce900000-0xce91ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 7F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: _SB
.PCI0.LPCB.EC0
: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: _SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xb20b3000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xc2f9b000-0xc3ffffff]
e820: reserve RAM buffer [mem 0x22f800000-0x22fffffff]
clocksource: Switched to clocksource hpet
FS-Cache: Loaded
pnp: PnP ACPI init
system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x2000-0x20fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 SYN0100 SYN0002 (active)
system 00:08: [io 0x0200-0x023f] has been reserved
system 00:08: [mem 0xfedb0000-0xfedbffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: [mem 0xce800000-0xce81ffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0xce800000-0xf7ffffff window]
pci_bus 0000:00: resource 21 [mem 0x1c00000000-0x1fffffffff window]
pci_bus 0000:00: resource 22 [mem 0xfd000000-0xfe7fffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs…
Freeing initrd memory: 20508K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbe47000-0xbfe47000] (64MB) mapped at [ffff8800bbe47000-ffff8800bfe46fff]
Scanning for low memory corruption every 60 seconds
workingset: timestamp_bits=62 max_order=21 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
ntfs: driver 2.1.32 [Flags: R/W].
fuse init (API version 7.26)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler cfq registered (default)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ioatdma: Intel® QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=61)
Initialized host personality
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
v1.01-e (2.4 port) Sep-11-2006 Donald Becker becker@scyld.com
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Fusion MPT base driver 3.04.20
Copyright © 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
usbcore: registered new interface driver idmouse
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 17
NET: Registered protocol family 15
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
microcode: sig=0x906e9, pf=0x2, revision=0x8e
microcode: Microcode Update Driver: v2.01 tigran@aivazian.fsnet.co.uk, Peter Oruba
rtc_cmos 00:04: setting system clock to 2018-06-15 07:49:09 UTC (1529048949)
Freeing unused kernel memory: 884K
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1148K
Freeing unused kernel memory: 256K
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
wmi: Mapper loaded
Linux agpgart interface v0.103
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[drm] Initialized
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
PTP clock support registered
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright© 1999 - 2015 Intel Corporation.
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 18:60:24:a5:b2:05
e1000e 0000:00:1f.6 eth0: Intel® PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
usb 1-11: new low-speed USB device number 2 using xhci_hcd
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata1: SATA max UDMA/133 abar m2048@0xce936000 port 0xce936100 irq 122
ata2: SATA max UDMA/133 abar m2048@0xce936000 port 0xce936180 irq 122
ata3: SATA max UDMA/133 abar m2048@0xce936000 port 0xce936200 irq 122
ata4: SATA max UDMA/133 abar m2048@0xce936000 port 0xce936280 irq 122
ata5: SATA max UDMA/133 abar m2048@0xce936000 port 0xce936300 irq 122
i801_smbus 0000:00:1f.4: enabling device (0100 -> 0103)
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[drm] Memory usable by graphics device = 4096M
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_01.bin failed with error -2
i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
input: Chicony HP Business Slim Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:03F0:304A.0001/input/input6
hid-generic 0003:03F0:304A.0001: input: USB HID v1.10 Keyboard [Chicony HP Business Slim Keyboard] on usb-0000:00:14.0-11/input0
input: Chicony HP Business Slim Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:03F0:304A.0002/input/input7
hid-generic 0003:03F0:304A.0002: input,hiddev0: USB HID v1.10 Device [Chicony HP Business Slim Keyboard] on usb-0000:00:14.0-11/input1
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (unknown) filtered out
ata1.00: ATA-9: SanDisk SD8SB8U-256G-1006, X4120006, max UDMA/133
ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (unknown) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SanDisk SD8SB8U- 0006 PQ: 0 ANSI: 5
[drm] failed to retrieve link info, disabling eDP
[drm] GuC firmware load skipped
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
usb 1-12: new low-speed USB device number 3 using xhci_hcd
random: fast init done
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
GPT:disk_guids don’t match.
GPT: Use GNU Parted to correct GPT errors.
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3407.990 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcaf6eb0, max_idle_ns: 440795321766 ns
input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:03F0:134A.0003/input/input9
hid-generic 0003:03F0:134A.0003: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-12/input0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

Hardware-Setup - Ende

Moeglicher Fehler erkannt: linbo_cmd laeuft bereits.
1187 root 0:00 {linbo_cmd} /bin/sh /usr/bin/linbo_cmd update_devices
1190 root 0:00 {linbo_cmd} /bin/sh /usr/bin/linbo_cmd update_devices
1191 root 0:00 {linbo_cmd} /bin/sh /usr/bin/linbo_cmd update_devices
Moeglicher Fehler erkannt: linbo_cmd laeuft bereits.
1597 root 0:00 {linbo_cmd} /bin/sh /usr/bin/linbo_cmd update 10.16.1.1 /dev/sda6
1602 root 0:00 {linbo_cmd} /bin/sh /usr/bin/linbo_cmd update 10.16.1.1 /dev/sda6
Installing for x86_64-efi platform.
grub-install: warning: cannot open directory `/usr/share/locale’: No such file or directory.
Installation finished. No error reported.
Moeglicher Fehler erkannt: linbo_cmd laeuft bereits.
2390 root 0:00 {linbo_cmd} /bin/sh /usr/bin/linbo_cmd hostname
2394 root 0:00 {linbo_cmd} /bin/sh /usr/bin/linbo_cmd hostname
NTFS signature is missing.
Failed to mount ‘/dev/sda’: Invalid argument
The device ‘/dev/sda’ doesn’t seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Moeglicher Fehler erkannt: linbo_cmd laeuft bereits.
2646 root 0:00 {linbo_cmd} /bin/sh /usr/bin/linbo_cmd start /dev/sda3 /dev/sda3 grub.exe /dev/sda6
2650 root 0:00 {linbo_cmd} /bin/sh /usr/bin/linbo_cmd start /dev/sda3 /dev/sda3 grub.exe /dev/sda6
Invalid bootnum value: 0012 Windows Boot Manager
^
Kann Windows-EFI-Bootdateien nicht restaurieren.
Stelle EFI-Standardboot wieder her.
Setze EFI BootNext: 0011.
BootNext: 0011
BootCurrent: 0013
Timeout: 0 seconds
BootOrder: 0013,000A,000C,0000,0001,0002,0003,0004,0005,0006,0007,0008,0009,000B
Boot0000 Startup Menu
Boot0001 System Information
Boot0002 Bios Setup
Boot0003 Drittanbieter-Option für das ROM-Management
Boot0004 System Diagnostics
Boot0005 System Diagnostics
Boot0006 System Diagnostics
Boot0007 System Diagnostics
Boot0008 Boot Menu
Boot0009 HP Recovery
Boot000A* grub
Boot000B Network Boot
Boot000C* IPV6 Network - Intel® Ethernet Connection (5) I219-LM
Boot000D* Linux Mint
Boot000E USB:
Boot000F SATA-CD:
Boot0010* Sony Storage Media 2A08120800889
Boot0011* Windows Boot Manager
Boot0012 Windows Boot Manager
Boot0013* IPV4 Network - Intel® Ethernet Connection (5) I219-LM
Boot0014* Windows Boot Manager
Boot0016* SanDisk SD8SB8U-256G-1006
Setze EFI Bootreihenfolge: 000A,0013.
BootNext: 0011
BootCurrent: 0013
Timeout: 0 seconds
BootOrder: 000A,0013
Boot0000 Startup Menu
Boot0001 System Information
Boot0002 Bios Setup
Boot0003 Drittanbieter-Option für das ROM-Management
Boot0004 System Diagnostics
Boot0005 System Diagnostics
Boot0006 System Diagnostics
Boot0007 System Diagnostics
Boot0008 Boot Menu
Boot0009 HP Recovery
Boot000A* grub
Boot000B Network Boot
Boot000C* IPV6 Network - Intel® Ethernet Connection (5) I219-LM
Boot000D* Linux Mint
Boot000E USB:
Boot000F SATA-CD:
Boot0010* Sony Storage Media 2A08120800889
Boot0011* Windows Boot Manager
Boot0012 Windows Boot Manager
Boot0013* IPV4 Network - Intel® Ethernet Connection (5) I219-LM
Boot0014* Windows Boot Manager
Boot0016* SanDisk SD8SB8U-256G-1006
Fehler beim Schreiben der EFI-Boot-Konfiguration.
Schreibe Reboot-Informationen nach /cache/boot/grub/grubenv.

Log session end: Fr 15. Jun 07:49:39 CEST 2018

Hallo zusammen,

gibt es eine Lösung für dieses Problem? Ich bin nämlich auch gerade darauf gestoßen. Sobald ich WIndows starte, wird im EFI die Bootreihenfolge umgestellt.

Viele Grüße

Andi

Hallo Andi,

ich habe das im Moment mit diesem Workaround gelöst. Läuft zumindest.

Viele Grüße
Manuel

Hallo zusammen,

ich hatte das gleiche Problem. Nachdem ich ein Kennwort für das Bios vergeben hatte konnte windows nicht mehr die Bootreihenfolge ändern.

Gruß
Veit

Hallo,
vielen Dank für den Tipp. Das werde ich testen.

viele Grüße
Manuel

Diesen Workaround setzen wir gegenwärtig auch ein. Nicht wirklich schön aber funktioniert.

Hallo Veit,

ich hatte das gleiche Problem. Nachdem ich ein Kennwort für das Bios
vergeben hatte konnte windows nicht mehr die Bootreihenfolge ändern.

… geniale Idee.

Ich frage mich direkt zwei Dinge:

  1. warum bin ich nicht selbst drauf gekommen? :slight_smile:
  2. warum muss man Windows immer austricksen?

Viele Grüße

Holger