Hallo Tobias,
die Meldung bekomme ich auch (Xenial mit Kernel 4.15), hier mal der Screenshot eines virtuellen Clients für den genauen Wortlaut:
Viele Grüße
Andreas
Hallo Tobias,
die Meldung bekomme ich auch (Xenial mit Kernel 4.15), hier mal der Screenshot eines virtuellen Clients für den genauen Wortlaut:
Viele Grüße
Andreas
Hallo Thomas,
schöner wäre es m.E., wenn man dem LINBO beibringen könnte, die Dateisysteme kompatibel zu den älteren Linux-Versionen anzulegen, vielleicht reicht es ja schon, dazu dieses ominöse metadata_csum zu „disablen“
Viele Grüße
Andreas
Hallo zusammen,
ich habe dazu mal folgendes versucht:
Client ins LINBO gestartet, dann per linbo-ssh dort angemeldet und in Zeile 240 von /usr/bin/linbo_wrapper
die Option -O ^metadata_csum
eingefügt
[Ee][Xx][Tt][234]) fcmd="mkfs.$fstype -O ^metadata_csum -v $label $dev" ;;
Anschließend linbo_wrapper partition
, linbo_wrapper format
, linbo_wrapper sync:1
und linbo_wrapper start:1
ausgeführt.
Beim Start von Xenial tritt die Fehlermeldung aber leider immer noch auf
Viele Grüße
Andreas
Nachtrag: Seit Version 1.43 gilt „Mke2fs will now create file systems with the metadata_csum and 64bit features enabled by default.“ Quelle: E2fsprogs Release Notes Möglicherweise kommen auch die anderen hier im Thread genannten Probleme daher?
Dagegen spricht, dass mir die Fehlermeldung (vermutlich immer mit metadata_csum, das weiß ich aber nicht sicher) schon länger aufgefallen war, also mindestens ein halbes Jahr. Weil mein ubuntu 16.04 client aber nie Probleme gemacht hat, hatte ich das nicht verfolgt.
Natürlich kann eine kombination von schon-immer-neuem-mke2fs und anderen Neuerungen in linbo-2.3.39 jetzt Probleme machen.
vG, Tobias
Beim nochmaligen Lesen deines ersten Beitrags ist mir jetzt auch aufgefallen, dass du das geschrieben hattest. Erst vor ein paar Tagen bin ich von 2.3.22 direkt auf 2.3.40 gegangen (ich hatte nach dem Upgrade auf lmn 6.2 im März bei diversen Laptops mit Kartenleser Probleme mit der sda-sdb-Zuordnung unter 2.3.31), deswegen kann ich zu den direkten Vorgängern der 2.3.40 nichts sagen. Ich bin mir aber ziemlich sicher, dass es unter 2.3.22 diese Meldung bei mir noch nicht gab.
Viele Grüße
Andreas
Hallo,
habe jetzt in den Weihnachtsferien mein Linbo geupdated.
Erfahrungen damit:
Völlig problemlos starten die neueren Rechner:
Netzwerk: r8168
CPU: i5-4460 3.2Ghz
VGA: GeForce GTX 650
Mainboard: H81M-E34 (MS-7817)
Keine SSD, S-ATA-AHCI-HD, Start über BIOS,nicht (U)EFI
Probleme machten aber ältere Rechgner, die mit dem nichtgrafischen “Initializing hardware” unter dem “LINBO”-Schriftzug stehenblieben.
Hier half aber sofort ein:
kerneloptions=nomodeset
Was ich allen mit älteren Mainboards,aber neuerem Linbo-Kernel generell empfehlen würde !
Außerdem habe ich das
splash hidden
deaktiviert.
L.G.
Christoph G.
P.S.
Die Hardware der älteren Rechner liefere ich noch nach. Sie haben Dualcore-CPUS und Intel-Hardware.
Hallo Christoph,
Hier half aber sofort ein:
kerneloptions=nomodeset|
Was ich allen mit älteren Mainboards,aber neuerem Linbo-Kernel generell
empfehlen würde !
Die Hardware der älteren Rechner liefere ich noch nach. Sie haben
Dualcore-CPUS und Intel-Hardware.
vor allem die Grafikkarte wäre interessant (der Hersteller)
LG
Holger
Hi Christoph, kannst du posten von welcher Version (nach 2.3.40 vermutlich) du geupdatet hast?
VG, Tobais
Lieber Tobias,
lieber Holger,
so, kam jetzt gerade mal zur Schule (ja, ich weiß, es ist Nacht …) und habe schnell mal nachgesehen:
linbo-Version ist 2.3.40-0
lspci ergibt: s.u.
L.G.
Ein gutes Neues Jahr Euch allen !!!
Christoph G.
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710 [Radeon HD 4350/4550]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
Subsystem: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
Subsystem: Foxconn International, Inc. NM10/ICH7 Family High Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at ff00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at fe00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at fd00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at fc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Foxconn International, Inc. NM10/ICH7 Family USB2 EHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
Subsystem: Foxconn International, Inc. 82801GB/GR (ICH7 Family) LPC Interface Bridge
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: intel_rng, lpc_ich, leds_ss4200
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Foxconn International, Inc. 82801G (ICH7 Family) IDE Controller
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4
I/O ports at 0170 [size=8]
I/O ports at 0374
I/O ports at fb00 [size=16]
Kernel driver in use: ata_piix
Kernel modules: pata_acpi
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Foxconn International, Inc. NM10/ICH7 Family SATA Controller [IDE mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at fa00 [size=8]
I/O ports at f900 [size=4]
I/O ports at f800 [size=8]
I/O ports at f700 [size=4]
I/O ports at f600 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: pata_acpi
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
Subsystem: Foxconn International, Inc. NM10/ICH7 Family SMBus Controller
Flags: medium devsel, IRQ 19
I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710 [Radeon HD 4350/4550] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology RV710 [Radeon HD 4350/4550]
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fdae0000 (64-bit, non-prefetchable) [size=64K]
I/O ports at be00 [size=256]
[virtual] Expansion ROM at fda00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
Subsystem: PC Partner Limited / Sapphire Technology RV710/730 HDMI Audio [Radeon HD 4000 series]
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at fdafc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)
Subsystem: Foxconn International, Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Flags: bus master, fast devsel, latency 0, IRQ 27
I/O ports at ce00 [size=256]
Memory at fdcff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdc00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8168
Kernel modules: r8168
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
Subsystem: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
Subsystem: Foxconn International, Inc. NM10/ICH7 Family High Definition Audio Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. NM10/ICH7 Family USB UHCI Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. NM10/ICH7 Family USB UHCI Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fe00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. NM10/ICH7 Family USB UHCI Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fd00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. NM10/ICH7 Family USB UHCI Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at fc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Foxconn International, Inc. NM10/ICH7 Family USB2 EHCI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
Subsystem: Foxconn International, Inc. 82801GB/GR (ICH7 Family) LPC Interface Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: intel_rng, lpc_ich, leds_ss4200
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Foxconn International, Inc. 82801G (ICH7 Family) IDE Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at fb00 [size=16]
Kernel driver in use: ata_piix
Kernel modules: pata_acpi
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Foxconn International, Inc. NM10/ICH7 Family SATA Controller [IDE mode]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at fa00 [size=8]
Region 1: I/O ports at f900 [size=4]
Region 2: I/O ports at f800 [size=8]
Region 3: I/O ports at f700 [size=4]
Region 4: I/O ports at f600 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: pata_acpi
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
Subsystem: Foxconn International, Inc. NM10/ICH7 Family SMBus Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710 [Radeon HD 4350/4550] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology RV710 [Radeon HD 4350/4550]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fdae0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at be00 [size=256]
[virtual] Expansion ROM at fda00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
Subsystem: PC Partner Limited / Sapphire Technology RV710/730 HDMI Audio [Radeon HD 4000 series]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 30
Region 0: Memory at fdafc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)
Subsystem: Foxconn International, Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at ce00 [size=256]
Region 2: Memory at fdcff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdc00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8168
Kernel modules: r8168
Ich konnte heute mein Problem lösen indem ich die Clients auf den neuesten Stand geupdated habe. Das Linbo läuft jetzt sauber durch und die Clients fahren wie gewohnt ohne Probleme hoch.
Dank des posts von blubbi2k habe ich das bei mir auch probiert, mit Erfolg!
Das ist jetzt aber ein typisches Henne-Ei-Problem geworden…
Situation:
Meine Linuxclients mit Image Stand September 2018 booten mit Linbo 2.3.39 und 2.3.40 nicht mehr. Daher Downgrade auf Linbo 2.3.38 -> Die Clients booten wieder durch. dist-upgrade des Clients und neues Image schreiben. Server wieder auf Linbo 2.3.40 aktualisieren -> Clients starten!
LG Alex
Hallo, Alex,
hattest Du mal bei Deinen linbo-Versuchen mit .40 an die kerneloptions in der start.conf
‘nomodeset’
angehängt / ausporbiert ?
Gruß
Christoph G
Nein, das habe ich nicht gemacht. Ich hatte nicht das Gefühl dass es ein Grafikkartenproblem war, sondern die Rechner hingen immer beim Initialisieren der Netzwerkkarte (zumindest blieben die Bootmeldungen an dieser Stelle stehen…)
Ich bin leider kein Experte, um erklären/erforschen zu können woran das lag. Bin nur froh dass es wieder läuft…
LG Alex
Hallo,
habe auf 2.3.40 aktualisiert und keine Probleme mit unterschiedlicher Hardware (Hersteller und Alter). In der start.conf steht kein ‘nomodeset’. Allerdings ist mein Ubuntuclient schon längere Zeit ohne Aktualisierungen, weil ich epoptes gerne noch bis zum 18.04-Client verwenden möchte. Es soll da ja mal nach einem Update des Clients Probleme gegeben haben.
Viele Grüße
Wilfried
Hallo,
Nein, das habe ich nicht gemacht. Ich hatte nicht das Gefühl dass es ein
Grafikkartenproblem war, sondern die Rechner hingen immer beim
Initialisieren der Netzwerkkarte (zumindest blieben die Bootmeldungen an
dieser Stelle stehen…)
Ich bin leider kein Experte, um erklären/erforschen zu können woran das
lag. Bin nur froh dass es wieder läuft…
… insgesammt ist das ein großer Mist: nun macht linbo schon seit 2.3
einen zwangsreboot, damit jedes Betriebsystem einen „frisch gebooteten“
Rechner bekommt, wo linbo noch nichts initialisiert hat, und dann kommt
jetzt bei noch neueren kernels dazu, dass ältere Kernel trotzdem nicht
richtig initialisieren… so ein Mist.
LG
Holger
Hallo,
ja, auch mich erinnert das an die “guten alten” kexec() - Zeiten…Offenbar bleiben “Initialisierungsrückstände” von linbo in diversen flash-Speichern auf dem mainboard zurück (???) - vielleicht findet Thomas einen softwareseitigen “cold reset” dafür - oder müssen wir grub dafür verantwortlich machen ?
Gruß,
Christoph
Hallo Holger,
so hatte ich das auch verstanden, aber irgendwie scheint linbo ja doch die Finger im Spiel zu haben. Wie sonst wäre es zu erklären, dass (ohne eine Änderung am client-Image) das Image nach Linbo-update auf 2.3.40 nicht mehr bootet, und nach Linbo-downgrade auf 2.3.38 sofort wieder anstandslos?
Ich verstehe das nicht, jedenfalls ist es unschön.
LG Alex
Hallo Wilfried,
falls du das Problem mit den verschwundenen Start-Stop-Links nach einem Kernelupgrade meinst: Das kann man vermeiden:
Viele Grüße
Andreas
Welchen Kernel hast du denn jetzt im Ubuntu-Image? 4.4.x oder 4.15.x?
Andreas
Hallo Andreas,
danke für den Hinweis.
Sehe ich das richtig, dass ich unter /etc/init.d zwei Skripte (epoptes und epoptes-client) mit gleichem Inhalt anlege? Inhaltlich muss nichts angepasst werden?
Viele Grüße
Wilfried